Roof Shingles Installation Guide for Homeowners: Step-by-Step Guide

Whether you are a DIY enthusiast who is trying your hands on for the first time by setting up asphalt shingles or someone who just wants to know if their roofers have installed their asphalt shingles correctly, all can find answers here. This guide will answer all of the questions you are eagerly looking for.

Asphalt shingles are popular because of their versatility, durability, low maintenance cost, and easy installation.

It is primarily because of their lightness that it makes it easier for you to handle and transport around. This is one of the main reasons why they are relatively easy to install. After all, choosing the correct shingles is critical to enhancing your house’s appearance, and you must also make sure your roofing is designed to protect your home and you from the rain, wind, and harsh rays of the sun. While undoubtedly asphalt shingles offer all of these features, it is only if they are properly installed.

The installation of asphalt roofing shingles is key to enhancing the efficiency of your roofing.

If they are not installed properly, even with high-quality asphalt shingles in your hand, your roofing will not be able to last long. Only with proper installation can asphalt shingles roofing be able to withstand the pressure of wind, sun, or rain.

So, to install the asphalt shingles roofing correctly, there are certain steps that should be followed diligently; any mishaps could compromise the efficiency and performance of your asphalt shingles.

Importance of Installing Your Asphalt Shingles Properly

There are many reasons why you should properly have your asphalt shingles roofing installed.

Any misalignment or issue could affect its appearance, durability, and longevity overall; hence, the benefits of asphalt shingles can only be reaped if they are installed properly as per the requirements.

One of the benefits of proper installation of asphalt shingles is they are designed to protect your roofing from moderate conditions. They help keep the rainwater away from entering your house; if installed improperly, this could lead to rainwater seeping inside your house, which causes leakages and even weakens your house structure. Even the wrong or incorrect nails used in nailing would blow off with the strong gust of wind. Hence, proper spacing and nailing your shingle in the correct spot is very important.

Next, we have effectively installed asphalt shingles so you can extend the life expectancy of your shingles and ensure your roofing energy efficiency is maintained throughout. Proper roofing helps reduce heat absorption and the need for excessive heating or cooling.

Lastly, proper fitting and installation help in creating a neat, sleek, and uniform look, which increases your overall look of the roofing.

Also Read >> Why Asphalt Shingle Colors Matter?

How to Install Roofing Shingles in Kerala?

Installation of asphalt shingles roofing requires specific tools, machines, and methods to make it easier to set with roofing.

Step 1:

Before moving on to the main part of installing the asphalt roofing, make sure you have all the required tools and machines like a hammer, nails as per the asphalt sheets, chalk to mark, measuring tape, etc.

Step 2:

Once you have all the tools with you, start inspecting your roofing. Make sure your roof deck is even and is not damaged, as it will be the base of your roofing that prevents your roof from sagging or collapsing.

Step 3:

Make sure there is no debris on the roofing and your entire roofing is clean before you move on to the next steps. Now it’s time for you to start laying the underlayment layers, starting from the bottom and gradually moving in an upward direction. This underlayment will help in providing extra protection to your roofing. Remember they should be overlaying one another with around 6 inches of gap while securing them with the roofing nails.

Step 4:

After this, start laying the stripes of starter shingles, as they would help prevent seeping. Once the starter strips are stuck using string adhesive glue, you are good to go with placing the flat asphalt shingles one by one, starting from the roofing eaves and moving up layer by layer in an upward direction.

Step 5:

As you move along, make sure you are nailing the nails to ensure they won’t move along. Remember, each asphalt roofing layer should be laid straight; you can use chalk to keep shingles straight. Using at least six nails per sheet is ideally recommended.

Step 6:

After covering the whole roofing with the asphalt shingles, install the ridge cap shingles where the two sides of the shingles meet at the top. Once again, one ridge cap should be overlaid with another before you nail them. Check for any loose shingles or misaligned shingles after you have finished installing the asphalt roofing shingles.

Here are a few common questions regarding how to install roofing shingles in Kerala. These questions highlight the importance of proper technique and tools to achieve a long-lasting and well-installed roof.

1. What materials and tools do you need to install roofing shingles in Kerala?

There are certain materials you should have like asphalt shingles, underlayment, asphalt stripes starter, nail, dripping edge, ladder, nails, ridges caps, hammer, measuring tape, chalk, safety gear, roofing knife, and lastly, roofing gun.

2. What are the best safety precautions to take when installing roof shingles in Kerala?

Some basic things that you should be taking into consideration to improve your safety are having someone by your side to help you out, wearing safety gear, making sure to install roofing only when it’s dry, as slippery roofing is dangerous to work with, and using ladders to be safe.

3. What are the common mistakes to avoid when installing roof shingles?

Avoid these roofing mistakes when installing shingles:

Improper nailing leads to leaks and faster aging of roofing.
Not using shingles starters as not using them could lead to more risks like damage caused by water and moisture.
Not aligning shingles properly in both ways, horizontally and vertically.

4. Is it best to install asphalt shingles by yourself?

It is better to have a professional roofing company as it would minimize the risk of improper alignment, gaps, and other problems that could affect the effectiveness and longevity of the roofing.

For expert guidance and premium roofing materials, trust CertainTeed India to deliver roofing solutions that last.

Conclusion

There are many requirements and guidelines for appropriately installing your roofing. Hence, it is essential to use the right tools and methods to ensure your asphalt shingle roofing is installed securely. To save you from all this hassle, it’s better to consult a professional roofing shingles company. They can do it much quicker and more efficiently than trying out the DIY approach.

Without a doubt, CertainTeed India is known for supplying top-notch roofing shingles in Kerala. They offers impressive durability and striking designs.

Whether you’re constructing a new roof or improving an old one, you can count on CertainTeed’s shingles for excellent results and a noticeable upgrade to your home’s look.